Applications Of Magnet Lifter And Key Features Of Magnet Lifter For Steel Handling In Pune, Ahmedabad & Across India
100 kg (All Size Available)
Rs. 6500
(Taxes to be paid extra)
Brand: SRE
SKU: SRE 161
Min Order Qty: 1
In steel fabrication yards and metal processing plants across Pune and Maharashtra, moving flat steel plates, round bars, and MS blocks manually or with slings is one of the most time-consuming and injury-prone operations on the production floor. The magnet lifter Pune from SRE Material Handling Equipment Pvt. Ltd. solves this directly — a permanent magnet lifter engineered to lift ferromagnetic materials up to 100 kg with a single-lever activation, eliminating slings, hooks, and the associated rigging time. SRE Material Handling Equipment Pvt. Ltd., an ISO 9001:2015 certified manufacturer based in Ahmedabad, Gujarat, produces this magnetic lifter using high-energy NdFeB (Neodymium Iron Boron) magnets housed in a precision-machined mild steel (MS) casing — delivering a rated lift capacity of 100 kg with a safety factor of 3.5:1 against magnetic flux saturation. Facilities in Vatva, Bhavnagar, and Kutch using this permanent magnetic lifter report a 60–70% reduction in rigging time per lift cycle.
Key Features Of The Permanent Magnet Lifter That Engineering Buyers In Gujarat, Pune & Bangalore Must Evaluate
Purchase managers in Bangalore, Hyderabad, and Noida evaluating a magnetic lifter for production use need to understand one critical failure mode: demagnetisation under thermal or mechanical shock. The SRE permanent magnet lifter (SKU: SRE 161) addresses this through its NdFeB magnet core, which retains 98% of magnetic flux after 1,000 operating hours under normal industrial conditions (ambient temperature: -20°C to +80°C). The magnet casing is CNC-machined to a surface flatness of ±0.1 mm, ensuring full-face contact with flat plate steel for maximum holding force. The single-handle lever rotates 90 degrees to engage or release the magnetic circuit — engagement is confirmed by a positive locking detent that prevents accidental release during a lift cycle. The unit weighs only 3.2 kg (for the 100 kg rated model), making it hand-portable and usable with any crane hook, chain block, or hoist without any adaptor plate. This magnetic lifter requires no electricity, no batteries, and no pneumatic supply — ideal for use in remote fabrication bays, open yards, and outdoor storage areas in Kathwada, Kalol, and Ghandhidham.
Applications Of Magnetic Lifter Across Steel Plants, Fabrication Yards, And Engineering Industries In Pune, Ahmedabad & Rajasthan
Factory owners and plant managers in Jaipur, Udaipur, and Indore who process ferromagnetic materials daily will find the SRE permanent magnet lifter applicable across a wide range of lifting tasks. Unlike chain slings or fibre straps that require wrapping, the magnet lifter contacts the workpiece surface directly — making it especially effective for polished plate steel where sling contact would cause surface damage. Key application areas include:
- Steel service centres and plate processing yards in Pune and Maharashtra — for moving flat MS plate, HR/CR coils, and cut-to-size blanks between cutting, bending, and welding stations
- Structural steel fabrication shops in Ahmedabad, Vatva, and Bhavnagar — for positioning I-beams, angles, channels, and flat bars in jig tables without sling damage
- Tool and die manufacturing in Pune, Bangalore, and Faridabad — for handling hardened steel blocks, mould inserts, and die components with precision placement accuracy
- CNC and VMC machine shops in Vadodara, Ahmedabad, and Gujarat — for loading and unloading raw material billets and machined workpieces onto machine tables
- Shipbuilding and offshore fabrication in Bhavnagar and Kutch — for steel panel handling in deck fabrication and hull section assembly operations
- Automotive stamping plants in Pune, Gurugram, and Chennai — for blank sheet feeding to stamping presses and finished part removal
- Railway wagon and coach fabrication in Bhopal, Indore, and Rajasthan — for handling structural MS panels, floor plates, and roof sections
- Scrap recycling and metal sorting yards in Ghandhidham, Mahesana, and Chattral — for separating ferrous scrap from mixed material streams
How SRE Material Handling Equipment Pvt. Ltd. Ensures Quality And Safety In Every Permanent Magnet Lifter Supplied Across India
For OEM sourcing managers and procurement heads in Gurugram, Rohtak, and Ambala, quality traceability in a lifting device is not optional — it is a statutory requirement under the Indian Factories Act and relevant ASME standards. SRE Material Handling Equipment Pvt. Ltd., registered under MSME and the Make in India initiative, subjects every magnetic lifter to a pre-dispatch proof load test at 2× the rated working load (200 kg for the 100 kg model) to verify mechanical integrity and magnet retention under overload conditions. Each unit is issued a load test certificate referencing the serial number, proof load applied, and inspection date — documentation essential for statutory compliance in manufacturing and engineering facilities across Maharashtra, Gujarat, and Rajasthan. Safety standards for below-the-hook lifting devices are governed by ASME B30.20 Below-the-Hook Lifting Devices, which specifies design, marking, and inspection requirements. For safety guidelines on crane and hoist operations, also refer to OSHA Cranes and Derricks standards. To place an order or request a load test certificate sample, contact SRE Material Handling Equipment Pvt. Ltd. today.
Comparison: Permanent Magnet Lifter vs Electromagnetic Lifter — Which Is Right For Your Plant?
| Parameter | Permanent Magnet Lifter (SRE 161) | Electromagnetic Lifter |
|---|---|---|
| Power Requirement | Zero — no electricity needed | Continuous electrical supply required |
| Risk of Load Drop | Zero risk of power-failure drop | Load drops if power fails |
| Operating Cost | Zero energy cost | Ongoing electricity cost |
| Magnet Retention | 98% flux retained over 1,000 hours | Consistent while powered |
| Best For | Flat plate, bar, and block steel lifts | Scrap and irregular ferrous material |
| Portability | Fully portable — 3.2 kg unit weight | Fixed — requires power cable |
| Maintenance | Zero — no moving parts or coils | Coil and rectifier maintenance needed |
Technical Specifications And Procurement Information For NdFeB Magnet Lifter In Pune, Gujarat & Across India
When purchase managers in Chennai, Hyderabad, and Bhopal specify a permanent magnet lifter for factory procurement, three technical parameters are non-negotiable: rated working load, minimum workpiece thickness, and surface flatness requirement. The SRE magnetic lifter (SKU: SRE 161) is rated for 100 kg on flat ferromagnetic steel with a minimum workpiece thickness of 20 mm and a maximum surface roughness of Ra 6.3 µm for full-rated lift. For workpieces with surface rust or mill scale, the effective lift capacity reduces by approximately 15–20%, which plant teams in Bhavnagar, Kutch, and Ghandhidham must factor into lift planning. Larger sizes — 300 kg, 500 kg, 1,000 kg, and 2,000 kg rated — are available from SRE with the same NdFeB core technology. All lifting devices are manufactured under an ISO 9001:2015 quality system, as referenced by the International Organization for Standardization. Explore complementary products including chain blocks and hoists, electric stackers, and pallet trucks. For bulk pricing and custom magnet lifter sizes, get a quote from SRE Material Handling Equipment Pvt. Ltd.
Related Material Handling Solutions From SRE
Related reading: Electric Stacker Pune | Hydraulic Stacker Pune | Semi Electric Stacker Pune
Also explore: hydraulic stackers and dock levelers for complete material handling systems from SRE.
FAQs — Permanent Magnet Lifter For Steel Handling And Industrial Procurement
What is the rated load capacity and safety factor of the SRE permanent magnet lifter for steel plants in Pune?
The SRE permanent magnet lifter (SKU: SRE 161) is rated for 100 kg working load on flat ferromagnetic steel with a safety factor of 3.5:1 against magnetic flux saturation. Larger rated models — 300 kg, 500 kg, 1,000 kg, and 2,000 kg — are also available. SRE Material Handling Equipment Pvt. Ltd., an ISO 9001:2015 certified manufacturer in Ahmedabad, supplies proof load-tested units with load test certificates to steel plants across Pune, Maharashtra, and pan-India.
What workpiece materials and surface conditions are suitable for the SRE NdFeB magnetic lifter in Ahmedabad and Gujarat fabrication yards?
The SRE NdFeB magnet lifter is designed for flat ferromagnetic materials — mild steel (MS), cast iron, and high-carbon steel plates. For optimum rated capacity, the workpiece must be minimum 20 mm thick with a surface flatness of Ra 6.3 µm or better. In Ahmedabad, Vatva, and Gujarat fabrication yards where mill-scaled or rusted plate is common, effective capacity reduces by 15–20%. The lifter is not suitable for aluminium, copper, stainless steel, or non-ferrous materials.
Does the SRE magnetic lifter require any electrical connection or battery for operation in factory environments in Bangalore and Hyderabad?
No. The SRE permanent magnet lifter operates entirely without electricity, batteries, or pneumatics. A single 90-degree lever rotation engages or releases the magnetic circuit — making it safe for use in hazardous areas, outdoor yards, and facilities in Bangalore, Hyderabad, and Chennai where power availability may be intermittent. This eliminates the critical safety hazard of load drop due to power failure — a key compliance requirement under Indian Factories Act at-height lifting regulations.
What certifications and compliance documentation are available for the SRE magnetic lifter for OEM sourcing in Gurugram and Noida?
Every SRE magnetic lifter is supplied with a proof load test certificate (tested at 2× rated working load), material test report for the NdFeB magnet core, and a declaration of conformity referencing ASME B30.20 below-the-hook lifting device standards. SRE Material Handling Equipment Pvt. Ltd. is ISO 9001:2015, MSME, and Make in India certified. For OEM sourcing managers in Gurugram, Noida, and Faridabad, full documentation packages including QAP and inspection checklist are available on request.
Pune ke steel plant mein magnet lifter ki delivery kitne din mein milegi aur kya bulk pricing available hai?
Pune aur Maharashtra ke liye SRE permanent magnet lifter ki standard delivery 3–5 working days mein hoti hai kyunki yeh compact unit hai. Bulk orders — 10 units ya zyada — par factory-direct competitive pricing milti hai. SRE Material Handling Equipment Pvt. Ltd. ISO 9001:2015 certified manufacturer hai aur load test certificate har unit ke saath provide karta hai. Different capacities — 100 kg se 2,000 kg tak — bhi available hain.
Ahmedabad ya Gujarat ke fabrication yard mein permanent magnetic lifter ka use kaise karna chahiye?
Permanent magnet lifter ka use karne ke liye pehle steel surface ko clean karein — rust aur grease remove karein. Lever ko 90 degree rotate karke magnet engage karein aur ek chhota sa lift test karein ground se 100 mm upar. Agar grip firm hai toh lift proceed karein. Ahmedabad, Vatva, aur Bhavnagar ke yards mein minimum workpiece thickness 20 mm se kam ho toh use avoid karein. Load test certificate aur operating manual SRE supply ke saath milta hai.
Rajasthan ke engineering industries ke liye NdFeB magnet lifter ka sabse suitable capacity kaun si hai?
Rajasthan ke Jaipur, Udaipur, aur nearby engineering units ke liye SRE ka 100 kg rated magnet lifter (SRE 161) general fabrication aur CNC shops ke liye best hai. Heavy structural steel yards ke liye 500 kg ya 1,000 kg rated models available hain. MSME registered aur Make in India certified hone ke karan government projects ke liye bhi eligible hai. Custom sizes bhi SRE ke Ahmedabad facility se manufacture hote hain.