Every heavy-engineering plant, steel fabrication unit, and automotive component factory in Ahmedabad, Vadodara, and Pune eventually hits the same ceiling: the moment loads exceed 2,000–3,000 kg, no floor-level equipment — not a forklift, not a stacker, not a pallet truck — can do the job safely. That’s when the plant manager needs an Industrial Crane — a permanent overhead or jib-mounted lifting system that moves tonnes of material through three dimensions across an entire bay. SRE Material Handling Equipment Pvt. Ltd., an ISO 9001:2015 certified manufacturer based in Ahmedabad, designs, fabricates, and supplies industrial cranes — including EOT (Electric Overhead Travelling) cranes, jib cranes, gantry cranes, and construction cranes — to factories across Gujarat, Maharashtra, Rajasthan, Bangalore, Hyderabad, Chennai, Noida, Bhopal, Faridabad, Indore, Rohtak, Ambala, Gurugram, and all major industrial corridors across India. Brand: SRE  |  Min Order Qty: 1

Types and Applications of Industrial Cranes Used in Factories Across Gujarat and Maharashtra

EOT Crane — The Production Floor Workhorse

An Electric Overhead Travelling (EOT) crane runs on elevated rails fixed to the structural columns of a factory bay, allowing the hoist to travel longitudinally along the bridge and laterally across the bay — covering the full three-dimensional working envelope of the building. This is the standard choice for heavy engineering plants in Vatva GIDC, Kathwada, and Kalol where 5–50 tonne loads need to be moved from the machining bay to the assembly area and back dozens of times per shift. A single 10-tonne EOT crane with a 20-metre span and 6-metre hook height can replace 8–12 workers doing manual rigging work — with a cycle time 4–6× faster than manual methods. SRE Material Handling Equipment Pvt. Ltd. fabricates EOT crane girders from IS 2062 Grade B MS structural steel with all primary welds NDT (ultrasonic) tested and certified before dispatch.

Jib Crane and Gantry Crane — Flexible Solutions for Specific Work Zones

Not every factory in Ahmedabad, Bhavnagar, or Gandhidham has the structural columns or roof height for a full EOT crane installation. A pillar-mounted jib crane solves the workstation-level lifting problem — a rotating arm (typically 3–8 metres radius) mounted to a floor-anchored column, carrying a chain hoist or electric hoist for loads from 250 kg to 5,000 kg. It gives a single machine operator or CNC workstation their own dedicated lifting tool within a 270° swing arc, without competing for the overhead crane with other bays. A gantry crane — a freestanding portal frame on wheels or fixed legs — serves outdoor yards, maintenance bays, and locations where rail-mounted EOT cranes are not feasible. In Kutch‘s port and logistics facilities and Gandhidham‘s container yards, gantry cranes in the 5–30 tonne range are the standard choice.

• Steel and heavy engineering — EOT cranes (5–100 tonne) for plate handling, machined component transfer, and press die change in Ahmedabad, Vadodara, and Pune
• Automotive OEM and Tier-1 suppliers — jib cranes at each assembly station for engine block, gearbox, and body panel handling in Pune, Chennai, and Faridabad
• Ship repair and port facilities — gantry cranes (20–50 tonne) for vessel component handling in Kutch, Bhavnagar, and Mangalore
• Construction and civil projects — tower cranes and construction cranes for structural steel, precast slab, and equipment lifting in Jaipur, Udaipur, Noida, and Gurugram
• Power plants and heavy process industries — double-girder EOT cranes for turbine, transformer, and reactor vessel handling in Gujarat, Rajasthan, and Karnataka
• Foundries and forge shops — heat-resistant ladle cranes (special design) for molten metal handling in Rajkot, Bhavnagar, and Belgaum
• Warehouse and logistics centres — single-girder EOT cranes (1–5 tonne) for loading bay operations in Noida, Bhopal, Indore, and Rohtak
• Railway workshops and defence facilities — heavy-duty gantry cranes and EOT cranes with anti-sway technology in Ambala, Gurugram, and Faridabad

Key Technical Specifications of Industrial Cranes Manufactured by SRE Material Handling Equipment Pvt. Ltd. in Ahmedabad

When a purchase head in Hyderabad, Bangalore, or Chennai is evaluating crane quotations, the critical technical parameters that separate a correctly designed crane from a dangerously underspecified one are: girder deflection under rated load, classification duty cycle, end carriage wheel load, and hoist brake holding torque. SRE Material Handling Equipment Pvt. Ltd. designs all EOT cranes to IS 3177 (Code of Practice for Electric Overhead Travelling Cranes) and classifies duty cycles per IS 807 — from M3 (light duty, maintenance use) to M7 (heavy duty, continuous production use). Crane girders are designed to limit mid-span deflection to L/888 (where L = span), per IS 3177 requirements, ensuring accurate load positioning. All hoists use brake-motor combinations with holding torque of minimum 1.5× full-load torque — preventing load drift during electrical failure.

Electrical components — pendant control station, festoon cable system, end carriage travel motors, and hoist motor — are sourced from proven Tier-1 Indian and global vendors and are specified at IP54 or higher ingress protection ratings as standard, covering dusty environments like Mahesana‘s ceramic and chemical units and Gandhidham‘s port-side warehouses. Variable Frequency Drives (VFDs) are offered as an option on all crane motions, enabling soft-start and speed control that reduces structural fatigue and extends motor service life by an estimated 30–40% in continuous-duty applications. Also see our Chain Block and Hoist range for smaller-capacity lifting within crane-equipped bays.

Why Industrial Buyers in Bangalore, Hyderabad, and Noida Choose SRE Material Handling Equipment Pvt. Ltd. for Industrial Cranes

The procurement cycle for an industrial crane in a Bangalore aerospace component plant or a Hyderabad heavy fabrication unit typically involves 3–4 vendor quotations, a technical specification review, and a factory visit. Where SRE Material Handling Equipment Pvt. Ltd. differentiates is in the engineering documentation package — every crane project is delivered with a complete design calculation report (structural and mechanical), rail layout drawing, electrical single-line diagram, and compliance statement referencing IS 3177, IS 807, and factory-specific requirements. This eliminates the back-and-forth with client safety officers and structural engineers that typically delays crane commissioning by 3–6 weeks. The company’s MSME and Make in India certification also means buyers in Gujarat, Rajasthan, and Maharashtra can leverage government procurement preferences where applicable. International crane design standards reference from ISO lifting equipment standards provides additional compliance framework for export-oriented clients.

“We ordered a 10-tonne double-girder EOT crane for our Vatva press shop. SRE delivered the complete design package within 10 days of order placement — structural drawings, electrical layout, everything. Installation was completed in 6 days. The crane has been running 3 shifts for 2 years with zero unplanned downtime.”
— Plant Engineering Head, Heavy Press Shop, Vatva GIDC, Ahmedabad

For buyers in Jaipur, Udaipur, Bhopal, Indore, Rohtak, Ambala, and Faridabad where on-site crane erection support from the manufacturer’s own team is not always feasible, SRE Material Handling Equipment Pvt. Ltd. provides detailed erection manuals and remote engineering support. Erection can be executed by any certified structural steel contractor using SRE’s documentation. Explore our Mobile Floor Crane range for flexible, non-fixed crane solutions within the same facility. Also see our Electric Stacker range for ground-level material movement coordinated with overhead cranes. Engineering compliance reference is available from OSHA Cranes and Derricks Safety Standards for multinational clients requiring global safety alignment.

Project Timeline, Installation, and After-Sales Support for Industrial Cranes Across Gujarat and Rajasthan

A standard 5-tonne single-girder EOT crane with a 15-metre span and 8-metre hook height follows a defined project timeline: design and drawing approval takes 2–3 weeks from order; fabrication takes 4–6 weeks for standard duty M4 classification; delivery to site by road (on flatbed trailer) takes 2–4 days depending on destination within Gujarat, Maharashtra, or Rajasthan; and erection and commissioning takes 5–10 days on site. Total project cycle from order to running crane: 8–12 weeks. For heavy-duty cranes above 20 tonnes or spans above 25 metres, project timelines extend to 16–20 weeks. SRE Material Handling Equipment Pvt. Ltd.‘s factory in Ahmedabad has the capacity to execute multiple concurrent projects across Himmatnagar, Mahesana, Bhavnagar, Chattral, Noida, Gurugram, Chennai, and Hyderabad. Annual Maintenance Contracts cover rope/chain inspection, brake pad check, hoist motor thermal scan, and end carriage wheel wear measurement. The BIS Mechanical Engineering standards portal provides IS 3177 and IS 807 reference documents for compliance review. Contact the SRE project inquiry team for a site assessment, load analysis, and detailed quotation. Also review our article on Permanent Magnetic Lifter Gujarat for below-hook accessories commonly used with industrial cranes.

Frequently Asked Questions — Industrial Crane Manufacturer in Ahmedabad