500 kg x 6 Meter (All Size Available)
Rs. 6,90,000
(Taxes to be paid extra)
Brand: SRE
SKU: SRE 150
Min Order Qty: 1
In large-format factories, warehouses, and construction sites, the bottleneck isn’t just reaching height — it’s being able to move to any location on a large floor plan and immediately begin work at height without repositioning a scaffold or waiting for an operator to reposition a lift. The Self Propelled Scissor Lift Table solves this problem precisely. With a built-in electric drive system, this Mobile Elevating Work Platform (MEWP) carries the operator, tools, and materials to any position on a level floor — then elevates to 6 metres working height with a 500 kg rated platform load — all driven and controlled from the platform itself. SRE Material Handling Equipment Pvt. Ltd. manufactures the Self Propelled Scissor Lift (SKU: SRE 150) at its ISO 9001:2015 certified facility in Ahmedabad, Gujarat, supplying construction, industrial, and warehouse customers across Pune, Bangalore, Hyderabad, Noida, Rajasthan, and PAN India.
Get a Quote for Bulk OrdersDrive System, Platform Specs, and Safety Architecture of Self Propelled Scissor Lift in Gujarat and Maharashtra
The defining feature of a Self Propelled Scissor Lift Table compared to a towed or push scissor lift is the onboard electric drive system — typically a 24V or 48V DC motor-driven rear-wheel drive system that propels the machine at ground-level travel speeds of 3–5 km/h. In large industrial facilities in Vatva, Kathwada, and Kalol, this means the operator can move the lift from one end of a 100-metre production hall to another in under 2 minutes without manual pushing effort. The SRE Self Propelled Scissor Lift (SRE 150) is rated for a platform load of 500 kg and maximum working height of 6 metres, accommodating 2–3 operators with equipment simultaneously — a key productivity advantage over single-person single-mast AWPs in multi-trade maintenance tasks.
Platform dimensions on the SRE 150 are approximately 2400 mm x 1200 mm — enough space for two operators to work side by side with material and tools without crowding. The scissor mechanism uses solid-section IS 2062 Grade A steel arms with lubricated pivot pins at each scissors joint, designed for a service life of minimum 5 years under regular use without pin replacement. SRE Material Handling Equipment Pvt. Ltd. uses hydraulic cylinder with electrohydraulic power unit for the lifting mechanism — providing smooth, controllable ascent and descent rates of approximately 0.1 m/s. Descent is gravity-controlled through a metered hydraulic flow control valve, ensuring no free-fall even in the event of hydraulic line failure. All these specifications are verified through factory acceptance testing before dispatch.
Stability and Anti-Tip Design
The most critical engineering challenge in a self-propelled scissor lift is maintaining stability as the platform rises — the centre of gravity moves upward with the load, increasing tipping sensitivity. The SRE Self Propelled Scissor Lift uses a wide 2000 mm x 1400 mm wheelbase at the base, combined with an inclinometer-based tilt sensor that prevents lift operation if the floor gradient exceeds 1.5° (approximately 1-in-38 slope). This protects operators from tip-over incidents on uneven industrial floors in Bhopal, Indore, and Faridabad. Additionally, automatic brakes engage on all four wheels whenever the drive control is released, preventing unintended roll on slightly sloped surfaces during work at height — a critical safety feature for indoor construction sites in Gurugram and Noida.
Battery Capacity and Charge Cycle Management
A self-propelled scissor lift that runs out of battery mid-shift on a large construction floor in Hyderabad or Chennai creates an immediate productivity and safety problem — the operator is elevated with no powered descent. The SRE 150 uses a 48V, 100–120 Ah lithium-iron phosphate (LiFePO4) battery system or sealed AGM lead-acid equivalent, providing a full 8-hour operational shift under typical drive and lift duty cycles. A battery charge indicator on the platform control box gives the operator a real-time charge state reading. When the battery drops below 15% charge, an audible alarm triggers and the drive speed automatically reduces — giving the operator time to complete the current task and return to the charging station before the battery is fully depleted.
Industrial and Construction Applications of Self Propelled Scissor Lift Across Ahmedabad, Rajasthan, Bangalore, and Noida
The Self Propelled Scissor Lift Table is the preferred access solution for applications where height access is required at multiple points across a large floor without the cost and setup time of fixed scaffolding. Its combination of self-drive mobility, large platform area, and 6-metre lift height covers a broad range of industrial and commercial access scenarios across Gujarat, Maharashtra, Karnataka, and Rajasthan. The 500 kg platform load rating means it handles tools, materials, and two operators simultaneously — a significant productivity advantage over single-person access solutions.
- Construction & Interior Fitout Projects – False ceiling installation, MEP (Mechanical, Electrical, Plumbing) rough-in work, ACP cladding, and paint application in commercial buildings and industrial sheds in Ahmedabad, Pune, Bangalore, and Gurugram.
- Warehouse Racking Installation & Maintenance – Installing, repositioning, or repairing high-bay racking systems in large distribution centers — particularly in Noida, Hyderabad, and Chennai e-commerce and logistics facilities.
- Aircraft Hangar Maintenance – Servicing aircraft fuselage, wings, and tail sections in aviation maintenance hangars where height access to different fuselage zones is required throughout the shift.
- Process Plant Turnaround Maintenance – Accessing overhead piping, heat exchangers, compressor internals, and overhead instruments during planned shutdown maintenance in Vadodara and Hyderabad petrochemical plants.
- Stadium & Arena Maintenance – Servicing overhead lighting rigs, CCTV systems, and scoreboard structures in stadiums across Rajasthan, Gujarat, and Maharashtra.
- Shipyard Block Assembly – Working on hull sections and superstructure components during ship block pre-assembly in yards near Kutch and Bhavnagar.
- Heavy Industry Maintenance – Accessing overhead conveyor systems, crane rails, and structural gantry elements during shutdown maintenance in steel and cement plants across Jaipur, Bhopal, and Indore.
- Pharma Plant Validation & Maintenance – Accessing overhead clean-room infrastructure, HVAC risers, and instrument clusters in GMP-certified pharmaceutical manufacturing facilities in Ahmedabad and Hyderabad.
Project Case Study — Commercial Fitout, Pune: “A large commercial fitout contractor in Pune was using a combination of aluminium scaffolding and ladders for a 12,000 sq ft office interior with a 5.5-metre ceiling. The scaffolding setup and teardown alone was consuming 45 minutes per zone shift. After deploying two SRE 150 Self Propelled Scissor Lifts, the same work areas were repositioned in under 3 minutes each. The project completion time was reduced by 8 working days against the original schedule.” — Site Manager, Commercial Interior Contractor, 2025
Self Propelled Scissor Lift Specifications and Model Comparison for Industrial Buyers in Gujarat and Rajasthan
| Specification | SRE 150 (Standard) | SRE 150 (Custom High) | Comparison: Manual Scissor Lift |
|---|---|---|---|
| Platform Height (Max) | 6 Metres | Up to 10 Metres | 1.5 m – 3 m |
| Rated Platform Load | 500 kg | 500 kg – 800 kg | 300 kg – 500 kg |
| Platform Size | 2400 mm x 1200 mm | Custom | 800 mm x 500 mm (standard) |
| Drive System | 48V DC Electric (Self Propelled) | 48V DC Electric | Manual push (no drive) |
| Ground Travel Speed | 3–5 km/h | 3–5 km/h | Manual only |
| Battery Life per Charge | 8 hours (full shift) | 8 hours | N/A |
| Tilt Safety Sensor | 1.5° cutoff inclinometer | 1.5° cutoff inclinometer | Manual level check only |
| Starting Price | Rs. 6,90,000 (taxes extra) | On Request | Rs. 1,50,000 onwards |
SRE Material Handling Equipment Pvt. Ltd. accepts bulk orders for self-propelled scissor lifts with project-specific customisation — including extended deck lengths, non-marking tyres for finished floor protection in Bangalore and Pune commercial projects, and 110V AC outlet on the platform for power tool use. Enterprise customers with multiple lift requirements across facilities in Chattral, Mahesana, and Ghandhidham can request fleet pricing with consolidated delivery and service scheduling. For related access solutions, explore the Aerial Work Platform range and the Scissor Lift Table for stationary hydraulic lifting. Safety standards for MEWPs in India are governed by the Factories Act working platform provisions and global best practices per ISO 9001:2015 certified quality systems.
Frequently Asked Questions – Self Propelled Scissor Lift Table
Q1. What is the maximum working height and platform load of the SRE 150 Self Propelled Scissor Lift?
The SRE 150 Self Propelled Scissor Lift Table from SRE Material Handling Equipment Pvt. Ltd. provides a maximum working height of 6 metres with a rated platform load of 500 kg — accommodating 2–3 operators with tools. The platform measures 2400 mm x 1200 mm. Custom heights up to 10 m and custom loads up to 800 kg are available. The unit is ISO 9001:2015 certified, fabricated from IS 2062 Grade A steel, and priced from Rs. 6,90,000 (taxes extra). Supplied across Gujarat, Maharashtra, and PAN India.
Q2. What is the ground travel speed and drive system of the Self Propelled Scissor Lift?
The SRE 150 uses a 48V DC electric drive system with rear-wheel motor drive, providing ground-level travel speeds of 3–5 km/h. The operator controls both drive and lift from the onboard platform control box. Automatic wheel brakes engage whenever the drive control is released, preventing roll on sloped surfaces. Non-marking tyre options are available for finished floor protection in Bangalore and Pune commercial construction projects. The drive system operates fully from the platform — no ground-level operator required.
Q3. What safety mechanisms prevent tip-over on uneven industrial floors?
The SRE 150 Self Propelled Scissor Lift is equipped with an inclinometer tilt sensor that prevents lift activation if the floor gradient exceeds 1.5°. The wide 2000 mm x 1400 mm wheelbase provides a low tipping moment at full height. A 500 kg overload sensor prevents lifting above rated capacity. For construction sites in Noida, Gurugram, and Faridabad with irregular concrete floors, SRE recommends verifying floor levelness with a spirit level before each deployment and marking safe operating zones to protect crew safety.
Q4. Can the Self Propelled Scissor Lift be used outdoors on a construction site?
The standard SRE 150 is designed for indoor and flat-floor outdoor applications — level concrete or asphalt surfaces. It is not intended for rough terrain or significant gradients. For outdoor construction sites in Rajasthan, Gujarat, and Maharashtra with uneven surfaces, a rough-terrain scissor lift specification (with pneumatic tyres and higher ground clearance) should be requested. SRE Material Handling Equipment Pvt. Ltd. can advise on the correct unit specification based on site conditions upon sharing site photos or a site description.
Q5. Ahmedabad ya Gujarat mein Self Propelled Scissor Lift ki price aur delivery kya hai?
Ahmedabad aur Gujarat ke customers ke liye SRE 150 Self Propelled Scissor Lift ki price Rs. 6,90,000 (taxes extra) se shuru hoti hai. Delivery typically 15–21 working days mein hoti hai standard configuration ke liye. Vatva, Kathwada, Kalol aur nearby Gujarat zones mein faster delivery possible hai. Bulk orders — 2 units ya zyada — ke liye project pricing aur coordinated delivery schedule request karein SRE Material Handling Equipment Pvt. Ltd. se.
Q6. Bangalore ya Pune ke commercial construction project ke liye Self Propelled Scissor Lift ka best size kaun sa hai?
Bangalore aur Pune ke commercial interior projects — office fitout, mall construction, industrial shed work — mein typically 6-metre working height, 500 kg platform, 2400 mm x 1200 mm platform size wala SRE 150 best fit hota hai. Finished floors pe non-marking tyres option important hai. Agar ceiling height 7 metre se zyada hai toh custom 8-metre ya 10-metre unit available hai. SRE is configuration ko Maharashtra aur Karnataka ke liye 15–21 days mein supply karta hai.
Q7. Kya Self Propelled Scissor Lift ki AMC aur spare parts service Hyderabad, Noida, ya Rajasthan mein available hai?
Haan — SRE Material Handling Equipment Pvt. Ltd. PAN India AMC aur breakdown service deta hai — Hyderabad, Noida, Jaipur, Udaipur, Bhopal, aur Chennai shamil hain. AMC mein hydraulic seal check, battery capacity test, tilt sensor calibration, drive system lubrication, aur safety device testing shamil hai. Spare parts — jaise hydraulic cylinder seals, limit switches, aur charger modules — 48–96 hours mein dispatch ho jaate hain Ahmedabad warehouse se.
For full product specifications, see the Mobile Scissor Lift product page. For smaller platform access, explore the Single Mast Aerial Work Platform. Check our blog for related equipment guides. Contact our sales team today for a project quote.