Magnet Lifter in Bhosri

Sheet metal press shop supervisors, fabrication floor managers, and toolroom engineers at steel and ferrous material processing facilities in Bhosri MIDC and across Pune‘s engineering zone encounter a specific and repetitive steel plate and block handling problem: picking up individual steel plates, billets, blocks, and structural sections from a stack — where each piece weighs 30–100 kg — for transfer to a machine table, welding fixture, or grinding station. Using a crane hook with a sling requires the operator to loop the sling around or under the plate, secure it, signal the crane, wait for lift, and then manually guide the plate to position — typically consuming 3–5 minutes per plate transfer. A permanently magnetised Magnet Lifter in Bhosri — the SRE 161 from SRE Material Handling Equipment Pvt. Ltd., rated at 100 kg capacity — cuts this to under 15 seconds per plate pick: the operator places the magnet on the steel plate surface, rotates the handle to engage magnetic flux, lifts via crane, and releases by rotating back — no sling, no rigging, no threading, priced at just Rs. 6,500 (taxes extra), manufactured under ISO 9001:2015.

Key Features Of SRE 161 Magnet Lifter That Transform Steel Plate Handling Speed At Bhosri And Pune Engineering Facilities

NdFeB Permanent Magnet Core — Zero Electricity, Full 100 kg Lifting Capacity From the Handle Alone

Workshop safety officers and EHS managers at Bhosri MIDC fabrication shops and Ahmedabad steel service centres consistently receive push-back from plant supervisors about electromagnetic magnet lifters — those requiring electrical power — in locations where power outlet proximity is unreliable, where cutting and welding creates EMI that disrupts electromagnetic systems, or where a power failure mid-lift creates an immediate load-drop safety hazard. The SRE 161 Magnet Lifter uses a NdFeB (Neodymium Iron Boron) grade N35 permanent magnet core — no electricity connection is ever required. The magnetic flux is controlled entirely by a rotary switch mechanism that aligns or misaligns the internal magnet pole relative to the contact face: rotate the handle to the ON position — 100 kg holding force engaged; rotate to OFF — flux redirected internally, contact face goes non-magnetic, load releases cleanly. The holding force to weight ratio is ≥3:1 safety factor: the rated 100 kg holding force is based on a contact surface with ≥4 mm steel thickness and Ra ≤6.3 µm surface roughness. Safety factor is built into the 300 kg breaking force rating of the lifting lug and body casting. SRE Material Handling Equipment Pvt. Ltd., an ISO 9001:2015 certified manufacturer, delivers to Bhosri and Maharashtra in 3–7 working days.

Die-Cast Aluminium Body — 1.8 kg Operating Weight for One-Hand Positioning on Overhead Crane Hook

Steel plate handling supervisors at Bhosri MIDC press shops and laser cutting facilities know the physical challenge of positioning a heavy magnetic lifter on a steel plate surface from a crane hook: if the lifter body is heavy, the operator must support the lifter weight with one hand while guiding it to the correct plate position — a two-person task. The SRE 161 Magnet Lifter‘s body is die-cast aluminium alloy (LM6 grade) — the complete unit including the NdFeB core and steel pole shoes weighs only 1.8 kg. A single operator can hold the SRE 161 steady on the crane hook with one hand and position it precisely on the steel plate surface with the other — without a second person’s assistance. This single-operator positioning capability means a one-person crane operation for plate transfers at Bhosri MIDC press shops — eliminating the second operator previously required to guide heavy slings or position heavy electromagnetic lifters. The aluminium body also provides spark and corrosion resistance for use in welding environments where a steel body lifter would develop surface rust that reduces magnet-to-workpiece contact area.

Applications Of Magnet Lifter Across Steel And Ferrous Material Handling In Bhosri, Maharashtra, And PAN India

Workshop supervisors, toolroom engineers, and procurement heads across Bhosri, Pune, Ahmedabad, and Bangalore deploy a magnet lifter wherever individual ferrous workpieces need fast, sling-free handling between crane hook and machine table or work surface. Applications include:

• Steel plate and sheet handling at Bhosri MIDC press shops: Individual plate pick from blanking stack to press bed — magnet lifter reduces per-plate transfer time from 3–5 minutes (sling) to under 15 seconds
• Die and mould block handling at Bhosri toolrooms and Ahmedabad: Mould steel block transfer from saw/milling to EDM or grinding machine table — lifter handles P20, H13 mould steel blocks up to 100 kg without sling threading
• Structural steel section handling in fabrication at Bhosri MIDC and Vatva: MS flat, angle, and channel section pick from stock rack to marking/cutting station — single operator, single crane hook, no rigging person needed
• Laser cutting and plasma cutting service centres in Ahmedabad, Pune, and Bangalore: Nested cut parts separated from skeleton sheet — magnet lifter picks individual cut pieces without scratching polished or painted surfaces (contact pad option)
• CNC machining billet and block handling in Bhosri MIDC machining shops: EN8, EN24, EN31 alloy steel billet loading to CNC chuck or 4-jaw fixture — no sling contact on precision finish surfaces
• Ship and marine equipment handling in Kutch and Gandhidham: Plate and structural section handling at ship repair and marine fabrication facilities — NdFeB magnet operates in high-humidity marine environments without corrosion affecting magnet performance
• Railway wagon and coach component handling in Gujarat: Wheel disc, axle blank, and bogey frame component transfer at railway component manufacturing facilities
• Steel distribution and service centre material handling in Jaipur, Rajasthan: Plate and sheet picking from coil-cut or saw-cut stack for customer sorting — fast throughput without sling rigging
• Automotive body panel handling at Bhosri MIDC and Chakan stamping plants: Stamped panel transfer from press to conveyorised assembly line — gentle contact face prevents surface marking
• Transformer core and silicon steel lamination handling in Gujarat (Vadodara, Ahmedabad): Silicon steel lamination block handling at transformer manufacturing facilities — magnet lifter handles silicon steel lamination packs up to rated capacity

Magnet Lifter SRE 161 — Specification And Model Comparison For Bhosri And Gujarat

Permanent Magnet Lifter vs Electromagnetic Lifter vs Sling — For Bhosri Steel Handling Applications

For Bhosri MIDC steel and fabrication operations handling ferrous plates, blocks, and sections up to 100 kg, the SRE 161 Magnet Lifter at Rs. 6,500 is the most operationally efficient, safest, and most economical lifting attachment available — eliminating sling rigging time, removing power-loss load-drop risk, and enabling single-operator plate transfers. Related products: Permanent Magnetic Lifter, Chain Block and Hoist, and Construction Crane. Related blog: Magnet Lifter Pune and Permanent Magnetic Lifter Ahmedabad. Submit an inquiry with workpiece thickness, surface condition, and required capacity for correct model selection.

For the ISO quality management standard applicable to permanent magnet lifter manufacturers, see ISO 9001:2015 Quality Management System. For IS standards governing lifting magnets and magnetic lifting devices in India, visit Bureau of Indian Standards (BIS). For lifting device safety guidelines covering magnetic lifters in workshop environments, refer to OSHA Cranes and Materials Handling safety guidance.