Electric Wire Rope Hoist in Bhosri

Maintenance engineers and plant managers at fabrication shops, engineering workshops, and light assembly facilities across Bhosri MIDC and the Pune industrial belt routinely face an overhead lifting challenge that a manual chain block cannot efficiently solve: lifting loads of 250–500 kg repeatedly — dozens of times per shift — from floor level to overhead beam height, at lift heights up to 20 metres, without operator fatigue or the inconsistent lifting speed that manual chain pulling creates during precision assembly and fitment operations. Manual chain blocks require an operator to exert approximately 25–35 kg of hand-pull force per lift stroke — creating cumulative upper-limb fatigue that slows lift cycles and increases musculoskeletal injury risk during multi-shift operations. The production-grade solution that maintenance heads and procurement managers at Bhosri, Pune, and across Maharashtra now install at workshop beam and overhead monorail stations is an Electric Wire Rope Hoist in Bhosri — the SRE 173 from SRE Material Handling Equipment Pvt. Ltd., rated at 250–500 kg with a 20-metre wire rope lift height, button-controlled, ISO 9001:2015 certified, and available from Rs. 7,500 (taxes extra) with PAN India delivery from the Ahmedabad manufacturing plant.

Key Features Of Electric Wire Rope Hoist SRE 173 That Improve Lifting Speed And Safety At Bhosri And Pune Engineering Workshops

Electric Motor Drive — Consistent Lift Speed Without Operator Fatigue at 20-Metre Hook Height

Workshop supervisors and toolroom managers at Bhosri MIDC engineering, fabrication, and light manufacturing facilities that use overhead lifting equipment across multiple shifts know the operational difference between a manual chain block and an electric wire rope hoist at the end of a full shift: with a manual block, lift speed drops significantly after 4–5 hours of heavy use as operator fatigue sets in, leading to load positioning delays and increased wrist and shoulder injury risk. The SRE 173 Electric Wire Rope Hoist uses a 415V / 3-phase 50 Hz electric motor with a factory-rated lift speed of 8 m/min (standard) — maintaining this consistent speed across every lift cycle throughout the full shift without any operator physical effort beyond pressing the pendant button. The wire rope drum is fitted with 6 × 19 galvanised steel wire rope (grade 1570 N/mm²) — rated for the full lift height of 20 metres with a wire rope safety factor of ≥5:1 at rated 500 kg load. The motor uses Class F insulation windings rated for continuous operation at 40°C ambient — suitable for Bhosri MIDC covered workshop environments throughout Maharashtra‘s summer season.

Limit Switches and Overload Protection — Built-In Safety for Bhosri Workshop Overhead Lifting

EHS managers and safety compliance officers at automotive and engineering facilities in Bhosri, Faridabad, and Gurugram who have reviewed overhead hoist incident reports know that the two most common hoist failure modes are: upper limit overrun (rope drum over-winding, causing structural failure of the rope anchor) and overload (lifting beyond rated capacity, causing rope or hook failure). The SRE 173 Electric Wire Rope Hoist addresses both with factory-fitted safety systems: an upper travel limit switch automatically cuts motor power when the hook reaches the upper limit position — preventing overwind damage to rope and drum; and a mechanical overload clutch rated at 110–120% of rated capacity that disengages the lift drive if the attempted lift load exceeds safe limits. The hook is forged alloy steel with a safety latch — preventing accidental load disengagement during horizontal travel. Every SRE 173 is factory-tested by SRE Material Handling Equipment Pvt. Ltd. at 125% rated load before dispatch from Ahmedabad to Bhosri, Pune, and PAN India buyers.

Applications Of Electric Wire Rope Hoist Across Industries In Bhosri, Maharashtra, And PAN India

Production engineers, workshop supervisors, and plant procurement officers in Bhosri, Pune, Ahmedabad, and Bangalore deploy an electric wire rope hoist at any workstation where repeated vertical lifting of 250–500 kg loads is required at heights up to 20 metres. Proven applications include:

• Engine and gearbox assembly in Bhosri MIDC automotive workshops: Engine block and transmission assembly lifting — consistent electric lift speed enables repeatable assembly cycle times without manual fatigue variability
• Fabrication shop plate and section lifting in Bhosri and Chakan: Steel plate and structural section lifting at welding and cutting stations — 500 kg capacity covers the heaviest MS plate section used in light structural fabrication
• Mould and die handling in Bhosri injection moulding and press shops: Mould half lifting and machine loading at injection moulding machines and presses where overhead beam access is available
• Machine maintenance and motor changeout in Bhosri MIDC plant maintenance: Electric motor, pump, and gearbox extraction and installation at production machine overhead positions
• Precast concrete element handling in Pune and Nashik construction yards: Precast panel and beam lifting at casting yard overhead gantry positions
• Chemical reactor and vessel maintenance in Vadodara and Kutch: Vessel lid, agitator, and internal component lifting at reactor maintenance overhead positions
• Steel coil and sheet handling at service centres in Ahmedabad, Vatva, and Kathwada: Coil end-lifting and sheet bundle lifting at overhead beam stations in steel processing bays
• Ship and boat maintenance in Kutch and Gandhidham port facilities: Marine engine, winch, and deck equipment lifting at covered boat maintenance bays
• Cold chain and refrigeration plant maintenance in Gujarat (Bhavnagar, Gandhidham): Compressor and condenser unit lifting during maintenance in refrigeration machine rooms
• Institutional and hospital equipment installation in Noida, Gurugram, and Faridabad: Medical imaging equipment, generator sets, and HVAC equipment installation at overhead lifting positions during building commissioning

How Electric Wire Rope Hoist SRE 173 Compares To Manual Chain Block And Electric Chain Hoist In Bhosri And Gujarat

Workshop procurement managers and plant engineers in Bhosri and Gujarat evaluating overhead lifting equipment need a clear comparison between the three common options available at different price and performance levels.

For Bhosri MIDC engineering workshops and light manufacturing facilities requiring consistent 250–500 kg lifting at heights up to 20 metres across multiple daily cycles, the SRE 173 Electric Wire Rope Hoist at Rs. 7,500 delivers electric-powered consistent lift speed and built-in safety features — with the critical advantage of 20-metre lift height that standard electric chain hoists cannot match at comparable price points. For related overhead and lifting equipment: Construction Crane, Mobile Floor Crane, and Magnetic Lifter. Related blog reading: Magnet Lifter Pune and Permanent Magnetic Lifter Ahmedabad. Submit an inquiry online for technical specification and site-specific recommendation.

Technical Specifications And How To Order Electric Wire Rope Hoist For Bhosri, Gujarat, And PAN India

Engineering procurement teams and plant maintenance managers in Bhosri, Pune, Ahmedabad, and Bangalore placing purchase orders for the SRE 173 Electric Wire Rope Hoist need to confirm beam flange width and overhead clearance at the inquiry stage. Standard specification: rated capacity 250–500 kg, maximum lift height 20,000 mm (20 metres), wire rope grade 6 × 19 galvanised — 1570 N/mm², rope safety factor ≥5:1 at 500 kg, motor 415V / 3-phase / 50 Hz (0.75–1.1 kW depending on capacity), motor insulation Class F, lift speed 8 m/min standard (variable speed option available), upper limit switch factory fitted, overload clutch factory fitted at 110–120% rated, hook material forged alloy steel with safety latch, beam clamp range 50–200 mm flange width (hook-mount or trolley-mount options), control pendant IP 54 rated push-button, 2-speed option. SRE Material Handling Equipment Pvt. Ltd., an ISO 9001:2015 certified Make in India manufacturer, delivers to Bhosri and Maharashtra in 7–15 working days; fleet orders (10+ units) in 15–25 working days. Contact SRE Material Handling Equipment Pvt. Ltd. for beam dimension confirmation and installation guidance.

For the quality management standard applicable to electric hoist manufacturers, see ISO 9001:2015 Quality Management System. For IS standards governing wire rope hoists in India, visit Bureau of Indian Standards (BIS) — IS 3938 (Electric Hoists). For overhead lifting and hoist safety guidelines applicable to Bhosri and Maharashtra workshops, refer to OSHA Hoists and Rigging safety standard.