500 kg x 6 Metre (All Size Available)
Rs. 6,90,000
(Taxes to be paid extra)
Brand: SRE
SKU: SRE 150
Min Order Qty: 1
Facility managers, construction project engineers, and maintenance supervisors at large industrial plants, warehouses, and infrastructure projects in Bhosri MIDC and across Pune‘s industrial zone face a specific elevated access challenge that aerial work platform masts and fixed scaffolding cannot efficiently address: routine overhead maintenance tasks — ceiling lighting, HVAC system, overhead crane runway inspection, roof structural inspection — at heights of 4–6 metres across a large floor area, requiring an access platform that moves freely between work positions without erecting and dismantling scaffolding at each point. The purpose-built mobile elevated work platform (MEWP) engineered specifically for this multi-point indoor and semi-outdoor elevated access requirement — rated at 500 kg platform capacity and 6 metres working height — is a Self Propelled Scissor Lift Table in Bhosri — the SRE 150 from SRE Material Handling Equipment Pvt. Ltd., a battery-driven, self-propelling scissor lift MEWP with an elevated platform rated at 500 kg and 6 metre working height, priced at Rs. 6,90,000 (taxes extra), manufactured under ISO 9001:2015 at the Ahmedabad plant.
Key Features Of SRE 150 Self Propelled Scissor Lift Table That Enable Safe Multi-Point Elevated Access Across Bhosri And Pune Industrial Facilities
6-Metre Working Height with 500 kg Platform Capacity — Two Operators Plus Heavy Tools at Full Height
EHS managers and facility engineers at Bhosri MIDC large-span manufacturing facilities, airport hangars in Hyderabad, and mall construction projects in Noida who specify overhead access platforms for simultaneous two-person access with heavy tools know the key platform sizing requirement: the platform must hold two operators (160–200 kg total body weight) plus tool and material load (30–50 kg) — typically totaling 200–250 kg — at the maximum working height without platform deflection that reduces operator confidence. The SRE 150 Self Propelled Scissor Lift Table provides a 500 kg platform rated capacity at 6,000 mm maximum working height — providing a 250–300 kg safety margin above typical two-person plus tool load scenarios. The scissors mechanism uses MS steel IS 2062 heavy box-section arms with sealed deep-groove ball bearings at all pivot points, providing a calculated platform deflection of less than 5 mm at maximum height under 500 kg central load. The platform deck is non-slip grated steel with full perimeter guardrail (1,100 mm height) and mid-rail — meeting IS 3521 platform safety requirements for work-at-height equipment. SRE Material Handling Equipment Pvt. Ltd., an ISO 9001:2015 certified manufacturer, delivers to Bhosri and Maharashtra in 20–30 working days.
Self-Propelled Battery Drive — Moves Loaded Platform Between Work Positions Without Descending
Construction project managers and plant maintenance supervisors at Bhosri MIDC and Pune facilities who have managed scaffolding-dependent overhead maintenance programmes know the hidden time cost: at each new overhead work position, the entire scaffold must be dismantled, transported, and re-erected — typically consuming 30–45 minutes per position move. For a maintenance programme with 20 overhead access positions across a large plant building, this adds 600–900 minutes (10–15 hours) of non-productive scaffold handling to the maintenance schedule. The SRE 150 Self Propelled Scissor Lift Table eliminates this entirely: the operator moves between overhead access positions while the platform remains elevated — activating the battery drive (24V / 225 Ah deep-cycle) at low-speed creep mode (2 km/h at height) to inch the unit to the exact new work position without descending. Ground-level drive speed is 4 km/h. This drive-at-height capability alone recovers the 10–15 hours of scaffolding handling time in a large plant maintenance programme at Bhosri MIDC.
Applications Of Self Propelled Scissor Lift Table In Bhosri, Maharashtra, And PAN India
Facility managers, construction project engineers, and plant maintenance supervisors across Bhosri, Pune, Ahmedabad, and Bangalore deploy a self propelled scissor lift table at large floor area facilities requiring elevated access at 4–6 metres across multiple positions. Applications include:
- Factory ceiling and bay overhead maintenance at Bhosri MIDC large-span plants: LED light replacement, HVAC maintenance, overhead crane runway inspection, cable tray work — at 4–6 metre ceiling height across entire building bay without scaffolding
- Warehouse rack installation at Bhosri MIDC and Nashik 3PL facilities: Upper tier rack assembly at 5–6 metre installation height — self-propelled unit moves along rack row for sequential beam and frame installation
- Airport terminal and cargo facility maintenance in Hyderabad and Bangalore: Ceiling lighting, signage, and HVAC duct access at airport terminal large-span ceiling heights
- Mall and retail fit-out construction in Noida, Gurugram, and Pune: Ceiling works, false ceiling installation, lighting, and HVAC at large-format retail building height of 5–6 metres
- Pharma GMP plant overhead service installation in Hyderabad and Ahmedabad: Clean utility pipe rack, HEPA filter frame, and clean-room overhead structure installation at pharmaceutical plant ceiling height
- Power plant and industrial facility maintenance in Rajasthan and Kutch: Overhead bus duct, control cable tray, and overhead equipment access during plant shutdown maintenance
- Ship and defence facility overhead maintenance in Kutch and Gandhidham: Ship maintenance bay overhead equipment access at heights requiring a stable large-platform MEWP
- Industrial construction and plant commissioning at Bhosri MIDC and Chakan: Equipment installation, piping erection, and cable routing at new plant construction overhead positions across large floor area
- Outdoor semi-sheltered construction works in Gujarat (Ahmedabad, Vadodara): Self-propelled scissor lift on hard-surface outdoor yards — structural erection, roofing, and cladding installation access
- Stadium and sports facility maintenance in Bangalore, Hyderabad, and Chennai: Stand roof, floodlighting, and HVAC maintenance access at sports stadium elevated positions
🏭 Project Experience — Bhosri MIDC Large-Span Factory Annual Maintenance, 2025
A Bhosri MIDC automotive parts manufacturer with a 12,000 sqm bay area at 6 metre ceiling height used scaffolding for annual overhead maintenance for 6 consecutive years — scaffold erection, maintenance, and dismantling consumed 12–14 days per annual maintenance programme. After introducing one SRE 150 Self Propelled Scissor Lift Table, the same maintenance scope was completed in 5 days — saving 7–9 days of production downtime per year. At a production value of approximately Rs. 3–5 lakh per day, the maintenance downtime reduction represented an annual saving of Rs. 21–45 lakh — recovering the Rs. 6,90,000 SRE 150 investment within the first year.
Self Propelled Scissor Lift Table SRE 150 — Specification Table For Bhosri And Gujarat
| Specification | SRE 150 Standard | Notes |
|---|---|---|
| SKU | SRE 150 | Standard configuration |
| Platform Capacity | 500 kg | Two operators + heavy tools |
| Max Working Height | 6,000 mm | Platform deck at 6 metres |
| Min Platform Height | ~1,100 mm (lowered) | Scissor fully collapsed |
| Platform Dimensions | 2,440 × 1,220 mm (standard) | Extension deck option available |
| Drive Battery | 24V / 225 Ah deep-cycle | Traction + lift shared |
| Ground Travel Speed | 4 km/h | Speed governed for safety |
| Drive-at-Height Speed | 2 km/h creep (at height) | Platform-at-height travel mode |
| Guardrail Height | 1,100 mm with mid-rail | IS 3521 compliant |
| Gradient Capability | Up to 25% (ground travel) | For semi-outdoor ramp use |
| Price | Rs. 6,90,000 (taxes extra) | Contact SRE for custom deck size |
Self Propelled Scissor Lift vs Scaffolding vs Single Mast AWP — For Bhosri And Maharashtra Elevated Access
| Feature | Scaffolding | Single/Double Mast AWP | SRE 150 Self Propelled Scissor Lift (6m) |
|---|---|---|---|
| Erection/Dismantling | 30–45 min per position | Instant — push to position | Instant — self-propel to position |
| Platform Capacity | 150–400 kg (tube type) | 100–200 kg (single person) | 500 kg — two persons + heavy tools |
| Max Working Height | Up to 20+ m (built up) | 6–10 m | 6 m — indoor and semi-outdoor |
| Move While Elevated | No — must dismantle | No — must lower | Yes — creep drive at 2 km/h at height |
| Platform Size | Variable | Single-person platform | 2,440 × 1,220 mm — two-person work area |
| Annual Maintenance Cost | Rs. 20,000–60,000 (rental + storage) | Rs. 2,000–5,000 | Rs. 5,000–10,000 (battery + annual service) |
| Capital Cost (INR) | Rental only typically | Rs. 13,500–40,000 | Rs. 6,90,000 (SRE 150) |
For Bhosri MIDC large plants and construction projects where 20+ overhead access positions per maintenance cycle are required at 4–6 metre height, the SRE 150 Self Propelled Scissor Lift Table at Rs. 6,90,000 recovers its capital cost within one maintenance cycle through scaffold rental and labour cost avoidance. For related elevated access equipment: Aerial Work Platform, Scissor Lift, and Good Lift. Related blog: Self Propelled Scissor Lift Table Pune and Fully Automatic Self Scissor Lift Table Mumbai. Submit an inquiry with working height and floor area for site-specific configuration recommendation.
Recover 7–9 days of production downtime at your Bhosri plant — SRE 150, Rs. 6,90,000.
📞 Call Now — +91 9316 208879 or +91 97247 22404500 kg · 6 m working height · Drive at height · IS 3521 guardrail · ISO 9001:2015 · Delivery 20–30 days
For the ISO quality management standard governing MEWP manufacturers, see ISO 9001:2015 Quality Management System. For IS standards governing mobile elevating work platforms in India, visit Bureau of Indian Standards (BIS) — IS 3521. For MEWP safety guidelines covering Bhosri and Maharashtra industrial operations, refer to OSHA Aerial Lifts safety standard.
Frequently Asked Questions — Self Propelled Scissor Lift Table For Bhosri And Maharashtra Buyers
Q1. What is the platform capacity, maximum working height, and drive speed of the SRE 150 Self Propelled Scissor Lift Table for Bhosri MIDC industrial maintenance and construction projects?
The SRE 150 Self Propelled Scissor Lift Table provides a 500 kg platform capacity at a maximum working height of 6,000 mm. The 2,440 × 1,220 mm platform deck accommodates two operators plus heavy tools simultaneously. The 24V / 225 Ah deep-cycle battery powers self-propelled ground travel at 4 km/h and creep-mode drive-at-height at 2 km/h. SRE Material Handling Equipment Pvt. Ltd., ISO 9001:2015 certified, delivers to Bhosri and Maharashtra in 20–30 working days.
Q2. How does the SRE 150 Self Propelled Scissor Lift Table’s drive-at-height capability reduce maintenance programme duration at Bhosri MIDC large-span factory facilities?
Traditional scaffolding requires 30–45 minutes per position move — dismantling, transporting, and re-erecting at each new overhead access point. For 20 overhead positions across a large plant, this adds 10–15 hours of non-productive scaffold handling. The SRE 150‘s 2 km/h creep-mode drive at height allows the operator to move the platform to the next work position while remaining elevated — zero descent and re-ascent time, zero scaffold handling. This drive-at-height capability alone recovers the 10–15 hours in a typical Bhosri MIDC large plant maintenance programme.
Q3. What gradient capability does the SRE 150 have for semi-outdoor use at Bhosri MIDC yard and construction site applications?
The SRE 150 Self Propelled Scissor Lift Table is designed for ground travel on gradients up to 25% (approximately 14°) in ground travel mode — suitable for yard ramps, loading area slopes, and semi-outdoor construction site grade transitions at Bhosri MIDC and construction projects in Gujarat and Maharashtra. Platform elevation is only permitted on level ground (≤1.5° tilt) — stabilisers must be deployed before platform elevation on any surface with gradient. The outrigger stabiliser system is standard-fit on the SRE 150.
Q4. What is the annual maintenance cost and battery life of the SRE 150 compared to scaffold rental at a Bhosri MIDC facility requiring 3–4 maintenance cycles per year?
Scaffold rental for a Bhosri MIDC large-span facility running 3–4 maintenance cycles per year typically costs Rs. 50,000–1,50,000 annually (scaffold, labour, storage). The SRE 150 Self Propelled Scissor Lift Table annual maintenance cost is approximately Rs. 5,000–10,000 per year (battery service, chain lubrication, annual safety inspection). Battery life at standard use: 4–5 years for the 24V / 225 Ah deep-cycle unit. The Rs. 6,90,000 capital cost is typically recovered within 3–5 years at Bhosri facilities running multiple maintenance cycles annually.
Q5. Bhosri ya Pune ke large-span factory mein Self Propelled Scissor Lift Table SRE 150 ki delivery aur commissioning timeline kya hai?
Bhosri aur Pune ke large-span factories ke liye SRE 150 Self Propelled Scissor Lift Table ki delivery 20 se 30 working days mein hoti hai. On-site commissioning: initial battery charge (8–10 hours), drive function test, platform elevation test, aur stabiliser deployment check — approximately half day. Operator safety briefing: 2–3 hours. SRE Material Handling Equipment Pvt. Ltd. operator manual, IS 3521 compliance certificate, aur load test certification delivery ke saath included.
Q6. Ahmedabad ya Gujarat ke warehouse rack installation project ke liye Self Propelled Scissor Lift Table 6 metre working height sufficient hai?
Ahmedabad aur Gujarat ke warehouse rack installation projects ke liye SRE 150’s 6-metre working height standard 5-level selective racking (top beam at approximately 5.0–5.5 metres) ke installation ke liye sufficient hai. 6-metre platform height se operator rack beam aur bracing positions up to 5.8–6.0 metres safely access kar sakta hai. Higher racking (6 metre+ beam heights) ke liye SRE 150 ka taller mast option ya higher-reach MEWP required hoga — specify rack height at inquiry.
Q7. Kya Self Propelled Scissor Lift Table SRE 150 ki battery replacement aur scissor mechanism service Noida, Hyderabad, ya Bangalore mein available hai?
Haan. SRE Material Handling Equipment Pvt. Ltd. ke Ahmedabad plant se spare parts — 24V / 225 Ah deep-cycle battery sets, outrigger stabiliser pad kits, scissors arm pivot pin replacement sets, platform guardrail section replacements, drive motor brush sets, aur IS 3521 load test certification renewal service — Noida, Hyderabad, Bangalore, aur PAN India ke liye 5–10 working days mein dispatch hote hain. Annual statutory safety inspection recommended per IS 3521 — estimated Rs. 5,000–10,000 per service.