Single Mast Aerial Work Platform Manufacturer in Ahmedabad

Maintenance supervisors at warehouses, factories, and commercial facilities in Ahmedabad, Gujarat, Pune, and Bangalore face a consistent overhead access problem: high-bay lighting changes, HVAC service, cable tray work, and racking installation require reaching 4–6 metres — tasks that take two workers and 3 hours of scaffolding setup, while a full scissor lift is too wide for the aisle. The answer is a Single Mast Aerial Work Platform Manufacturer in Ahmedabad supplying the SRE 151 — a compact, battery-powered vertical mast lift with 130 kg capacity and 6 metre working height at just Rs. 1,75,000. One operator, two minutes setup, task done — and repositioned to the next bay in under 60 seconds.

The single mast aerial work platform fills the access gap between a ladder (unsafe, no load capacity) and a full scissor lift (too wide, too expensive for routine maintenance tasks). Its narrow base — typically 700–850 mm — passes through standard 900 mm industrial doorways and travels in warehouse aisles shared with pallet trucks without any access route modification. For facilities in Vatva, Kathwada, Kalol, Gandhinagar, Himmatnagar, Mahesana, Bhavnagar, Kutch, and Chattral GIDC industrial zones that manage routine overhead tasks daily, the SRE 151 pays back its purchase cost in scaffolding-rental savings within 6–8 weeks of deployment.

How the SRE 151 Single Mast AWP Works and Where It Outperforms Scaffolding in Ahmedabad and Gujarat Facilities

The SRE 151 single mast aerial work platform uses a telescoping vertical mast column — fabricated from MS steel with a minimum wall thickness of 3 mm — to raise a non-slip aluminium platform from ground level to 4 metres (platform height) giving a working reach of 6 metres. The lift mechanism is a 24V DC electric-hydraulic system: a compact hydraulic pump (motor rating 0.55 kW) pressurises an internal cylinder that extends the carriage upward at 0.1 m/s under rated load. Lowering is controlled via a needle valve at 0.08 m/s — preventing free-fall descent even in complete hydraulic line failure. The battery (24V / 60Ah, maintenance-free) delivers 40–60 full lift-lower cycles per charge — sufficient for an 8-hour maintenance shift at moderate-frequency task rates. SRE Material Handling Equipment Pvt. Ltd., ISO 9001:2015 certified and MSME registered in Ahmedabad, produces the SRE 151 with every structural weld documented and every unit load-tested at 125% rated capacity (162.5 kg) before dispatch.

Single Mast AWP vs Scaffolding vs Scissor Lift — Fast Application Fit Guide

For maintenance teams in Ahmedabad‘s GIDC industrial estates — Vatva, Naroda, Odhav — who rent scaffolding 5+ days per month at Rs. 1,000–2,000 per day, the SRE 151 achieves break-even in under 90 days. Beyond that point, every maintenance task performed on the owned platform is pure operational cost saving. The compact footprint — 850 mm wide, 1,450 mm long — allows the SRE 151 to be stored upright in any corner of a maintenance bay when not in use, with zero floor-space penalty.

Industrial Applications of Single Mast Aerial Work Platforms Across Ahmedabad, Noida, Bangalore, and Hyderabad

The SRE 151 single mast vertical mast lift excels in applications where one operator must reach 4–6 metres repeatedly in confined spaces. Here are the primary use cases from client facilities in Gujarat, Maharashtra, Rajasthan, and across PAN India:

• High-Bay LED Fitting & Maintenance — Replacing LED high-bay fixtures at 4–6 m in warehouses and factories in Ahmedabad, Noida, and Gurugram. One operator, one machine — task completed without scaffolding crew.
• HVAC Duct Installation & Service — Accessing overhead ducts in pharma cleanrooms and food processing units in Hyderabad and Bangalore — battery-powered, zero emission, GMP-compatible.
• Cable Tray & Electrical Conduit Work — Installing and maintaining electrical infrastructure at 3–6 m in manufacturing plants across Faridabad, Rohtak, Ambala, and Gurugram.
• Racking & Shelving Installation — Positioning and securing high-bay racking uprights and crossbeams during warehouse fit-outs in Gandhinagar, Bhopal, and Indore distribution centres.
• Painting & Surface Finishing at Height — Interior wall and column painting at 4–6 m in industrial buildings across Jaipur, Udaipur, and Indore.
• Conveyor Belt Inspection & Repair — Accessing overhead conveyor structures in automotive, FMCG, and textile plants in Gujarat and Maharashtra.
• Fire Suppression System Maintenance — Sprinkler heads, detectors, and suppression piping access in all facilities requiring annual fire system certification in Gujarat, Maharashtra, and Rajasthan.
• Signage & Overhead Branding Installation — Installing warehouse zone signage, safety boards, and overhead branding panels in large industrial and retail facilities across Chennai and Bangalore.
• Structural Steel Inspection — Periodically inspecting overhead steel structures and roof joints in heavy engineering plants in Bhavnagar and Kutch.
• Window Cleaning & Glazing — Exterior and interior glazing access in commercial buildings — safer than rope access, faster than scaffolding, usable indoors without ventilation requirements.

Key Technical Features of the SRE 151 Single Mast AWP for Purchase Managers in Ahmedabad, Pune, and Noida

SRE 151 Technical Specification Summary

• Platform Capacity: 130 kg — One operator (up to 100 kg) plus 30 kg tools and materials. Hydraulic overload relief cuts lift activation at 110% rated load.
• Working Height: 6 Metres (All Sizes Available) — Platform height 4 m; operator reach 6 m. Custom heights to 8 m on request for extra-tall facilities.
• Mast: MS Steel, 3 mm Wall, Powder-Coated — Cold-formed MS steel channel mast; epoxy powder coat 60–80 microns DFT for corrosion resistance in industrial environments.
• Drive: 24V DC, 0.55 kW Electric-Hydraulic — Lift speed 0.1 m/s; lower speed 0.08 m/s (needle valve). Battery: 24V / 60Ah maintenance-free; 40–60 cycles per charge.
• Platform: 700×500 mm Aluminium Non-Slip Grating — Self-draining open grating; anti-slip coefficient rated for industrial use.
• Base Footprint: 850×680 mm — Passes through standard 900 mm industrial doorways. Movable by one operator using integrated push handle.
• Safety: Full Guardrail (1,100 mm) + Mid-Rail + Toeboard — Tilt sensor (3° cutoff); emergency descent valve; electromagnetic parking brake; audible alarm.
• Certification: ISO 9001:2015 Manufacturing + 125% SWL Load Test — Factory test certificate (162.5 kg) issued with every unit. CE norm alignment. Structural steel per BIS IS 2062.

SRE Material Handling Equipment Pvt. Ltd. carries the SRE 151 in stock at its Ahmedabad production facility — dispatching standard configurations within 5–7 working days to Vadodara, Gandhinagar, Surat, and all of Gujarat; 7–10 working days to Pune, Mumbai, Bangalore, Hyderabad, Chennai, Noida, Jaipur, Bhopal, Indore, Faridabad, Rohtak, Ambala, and Gurugram. Spare parts — battery packs, hydraulic seals, platform grating panels, and control pendants — dispatch within 48 hours to all PAN India locations. For international operator safety reference: OSHA Aerial Lift Safety guidelines. Design standard: ISO 16368 Mobile Elevating Work Platform. Indian structural steel: BIS IS 2062 standard. Also explore: full aerial work platform range from SRE and the self propelled scissor lift for larger-platform access.

Why Warehouse Managers and Factory Owners in Jaipur, Chennai, and Indore Choose SRE Material Handling Equipment Pvt. Ltd.

The Indian single mast AWP market splits between imported units priced at Rs. 3–5 lakh and locally fabricated units with no certified load documentation. SRE Material Handling Equipment Pvt. Ltd., an ISO 9001:2015 and MSME registered Make in India manufacturer, occupies the ideal middle position — certified Indian manufacturing at Rs. 1,75,000 per unit, with factory load-test documentation, domestically available spare parts, and after-sales support accessible across Gujarat, Maharashtra, Karnataka, Tamil Nadu, Telangana, Rajasthan, and Delhi NCR. For government, PSU, and defence-sector procurement under domestic content preference frameworks, the company’s MSME and Make in India credentials support GeM portal procurement directly. For related lifting and handling solutions in the same facility, the hydraulic stacker range handles ground-level pallet operations alongside the AWP.

Frequently Asked Questions — Single Mast Aerial Work Platform Manufacturer in Ahmedabad